Strategies for Improving Occupational Safety in the ATBM Weaving Industry

  • Nurmalinda Rahmawati Universitas Bakrie
  • Jerry Heikal
Keywords: JSA, IFAS, EFAS, Shuttel, Weaving

Abstract

Occupational safety is a crucial aspect of the manufacturing industry, especially in the weaving industry that uses shuttle machines. This study aims to identify risks and develop strategies to prevent occupational accidents in the shuttle weaving industry. The methods used include job safety analysis (JSA) and strategy formation using the IFAS and EFAS matrix to formulate the necessary solutions. The results revealed that seven types of jobs were identified as having 23 potential risks of occupational accidents. The highest risk was found in the shuttle weaving process, where the activities involved have the potential to cause physical injuries such as permanent disability due to being targeted by the weft binoculars during production. The proposed strategies include improving weaknesses by capitalising on existing strengths, implementing new technologies and safety policies to address threats, and improving compliance and incident response to reduce risks. This research is expected to contribute as a reference for the weaving industry with shuttle machines in conducting risk analysis and implementing occupational accident prevention measures.

Downloads

Download data is not yet available.

References

Azwina, R., Wardani, P., Sitanggang, F., & Silalahi, P. R. (2023). Strategi Industri Manufaktur Dalam Meningkatkan Percepatan Pertumbuhan Ekonomi Di Indonesia. Profit: Jurnal Manajemen, Bisnis Dan Akuntansi, 2(1), 44–55. https://journal.unimar-amni.ac.id/index.php/profit/article/view/442
Handari, S. R. T., & Qolbi, M. S. (2021). Faktor-Faktor Kejadian Kecelakaan Kerja pada Pekerja. Jurnal Kedokteran Dan Kesehatan, 17(1), 90–98.
Marfiana, P., Ritonga, H. K., & Salsabiela, M. (2019). Implementasi Job Safety Analysis (JSA) Sebagai Upaya Pencegahan Kecelakaan Kerja. Jurnal Migasian, 3(2), 25–32. https://doi.org/10.36601/jurnal-migasian.v3i2.75
Muhammad, I., & Susilowati, I. H. (2021). Analisa Manajemen Risiko K3 Dalam Industri Manufaktur Di Indonesia: Literature Review. PREPOTIF : Jurnal Kesehatan Masyarakat, 5(1), 335–343. https://doi.org/10.31004/prepotif.v5i1.1635
Mutiara, P. B. (2021). Analisis Matriks Ifas Dan Efas Pt Unilever Tbk Pada Pandemik Covid-19. Jurnal Bina Bangsa Ekonomika, 14(2), 363–371. https://doi.org/10.46306/jbbe.v14i2.90
Pratama Rahman, M. D., Priyana, E. D., & Rizqi, A. W. (2022). Job Safety Analysis (JSA) Sebagai Upaya Pengendalian Resiko Kecelakaan Kerja Pada Pekerjaan Fabrication Dd PT. Wilmar Nabati Indonesia. Teknika Sains: Jurnal Ilmu Teknik, 7(2), 98–109. https://doi.org/10.24967/teksis.v7i2.1947
Restuputri, dian palupi, & Sari, resti prima dyan. (2019). ANALISIS KECELAKAAN KERJA DENGAN MENGGUNAKAN METODE HAZARD AND OPERABILITY STUDY (HAZOP) (Studi Kasus: PT. XYZ). Jurnal Teknik Industri Terintegrasi, 2(2), 30–37. https://doi.org/10.31004/jutin.v2i2.480
Robert, M. M. J., Bonny, S. F., & Soputan. M .E Gabby. (2014). Manajemen Risiko Kesehatan Dan Keselamatan Kerja (K3) (Study Kasus Pada Pembangunan Gedung Sma Eben Haezar). Jurnal Ilmiah Media Engineering, 4(4), 229–238.
Rusydiana, S. A., & Firmansyah, I. (2018). Strategi Pengembangan Lembaga Keuangan Mikro Syariah di Indonesia: Pendekatan Matriks IFAS EFAS. Jurnal Ekonomi Islam, 9(1), 51.
Sani, G. M., Priyana, E. D., & Rizqi, A. W. (2022). Identifikasi Dan Analisis Risiko Kecelakaan Kerja Dengan Metode Jsa ( Job Safety Analysis ) Di Bengkel Pemesinan Smk Nurul Islam Gresik. SITEKIN: Jurnal Sains, Teknologi Dan Industri, 20(1), 300–307. https://ejournal.uin-suska.ac.id/index.php/sitekin/article/view/20001
Santoso, T., Budiharti, N., & Haryanto, S. (2021). Upaya Pengendalian Resiko Kecelakaan Kerja dengan Metode Job Safety Analysis Pada Pekerjaan Pembuatan Produk Tahu di Desa Ploso, Kab. Jombang, Jawa Timur. Jurnal Valtech (Jurnal Mahasiswa Teknik Industri), 4(2), 238–247. https://ejournal.itn.ac.id/index.php/valtech/article/view/3877
Sukapto, P., Djojosubroto, H., & Permana, H. (2018). Penerapan Metode Job Safety Analysis and Risk Score untuk Meningkatkan Keselamatan dan Kesehatan Kerja pada Departemen Printing, Sewing dan Assembly PT. PAI, Bandung (Suatu Pendekatan Participatory Ergonomic). Jurnal Kesehatan, 9(3), 403. https://doi.org/10.26630/jk.v9i3.994
Ulkhaq, M. M., & Putri, D. M. (2015). PENILAIAN RISIKO KESELAMATAN KERJA PADA PROSES PEMBUATAN BALOK JEMBATAN DENGAN METODE JOB SAFETY ANALYSIS ( JSA ).
Wibbowo, L. A. (2022). Analisis IFAS dan EFAS Menggunakan Metode SWOT Pada Perguruan Tinggi Swasta. Jurnal Wahana Informatika (JWI), 1(2), 125–139.
Wicaksana, A., & Rachman, T. (2023). Pengantar Teknik Industri (1 (ed.); 1st ed., Vol. 1, Issue 1). Widina. https://medium.com/@arifwicaksanaa/pengertian-use-case-a7e576e1b6bf
Published
2024-09-27
How to Cite
Rahmawati, N., & Heikal, J. (2024). Strategies for Improving Occupational Safety in the ATBM Weaving Industry. Sainteks: Jurnal Sain Dan Teknik, 6(2), 297-309. https://doi.org/https://doi.org/10.37577/sainteks.v6i02.780
Section
Articles