Re-Design Modern Industrial Workshop Table with Total Deformation Analysis and Stress Test
DOI:
https://doi.org/10.37577/sainteks.v6i1.616Abstract
Abstract belum tersedia.Downloads
Download data is not yet available.
References
Almer, R., Syam, B., Isranuri, I., Sabri, M., Marragi, M., & Abda, S. (2016). Simulasi Statik Dan Dinamik Parking Bumper Redesain Menggunakan Software Ansys 12.0. Jurnal Dinamis, 4(4).
Ariano, M., & Dagnino, A. (1996). An intelligent order entry and dynamic bill of materials system for manufacturing customized furniture. Computers & Electrical Engineering, 22(1), 45–60.
Fahmi, H., Eko, N., & Yuwono, B. (2022). Analisis Kekuatan Poros Pada Rancangan Pole Welding Fixture Machine Untuk Pengelasan Tiang H4-H13 Dengan Metode Finite Element Analysis. Prosiding Seminar Nasional Teknik Mesin, (1), 554–563.
Kharola, A., Bansal, G., Devli, D., Pandey, P., Kuriyal, R., & Avikal, S. (2022). Design And Simulation Of Foldable Furniture In Ansys. Elementary Education Online, 20(4), 4394.
Kittur, J., Ramachandran, M., Fegade, V., & Ragavendran, U. (2018). Numerical Investigation of Total Deformation Inroller Bearing using Ansys Analysis. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 51–58.
Kristianto, F. P., Fariz, N., Saputra, D., & Athirah, S. I. (2022). Framework for Furniture and Wood Processing Industry Polytechnic in Era Disruption of Covid-19. International Research Journal Of Business Studies, 14(2), 107–117.
Mahalingam, T., & Chandima, D. P. (2016). Gap calculation method to minimize inductance drop during reflow on helical wound planar power inductors. 2016 Manufacturing & Industrial Engineering Symposium (MIES), 1–6. IEEE.
Pawar, P., Ballav, R., & Kumar, A. (2016). Finite element method broach tool drilling analysis using explicit dynamics ansys. International Journal of Modern Manufacturing Technologies, 8(2), 54–60.
Raafat, E., Nassef, A., El-hadek, M., & El-Megharbel, A. (2019). Fatigue and thermal stress analysis of submerged steel pipes using ANSYS software. Ocean Engineering, 193, 106574.
Singh, L., Rawat, S. S., Hasan, T., & Kumar, U. (2015). Finite element analysis of piston in ANSYS. International Journal of Modern Trends in Engineering and Research, 4, 619–626.
Supardi, S. (2020). Penyelenggaraan Praktik Industri di Politeknik Industri Furnitur Kendal di Era Pandemi Covid-19. Prosiding Seminar Nasional Pascasarjana (PROSNAMPAS), 3(1), 543–551.
Ariano, M., & Dagnino, A. (1996). An intelligent order entry and dynamic bill of materials system for manufacturing customized furniture. Computers & Electrical Engineering, 22(1), 45–60.
Fahmi, H., Eko, N., & Yuwono, B. (2022). Analisis Kekuatan Poros Pada Rancangan Pole Welding Fixture Machine Untuk Pengelasan Tiang H4-H13 Dengan Metode Finite Element Analysis. Prosiding Seminar Nasional Teknik Mesin, (1), 554–563.
Kharola, A., Bansal, G., Devli, D., Pandey, P., Kuriyal, R., & Avikal, S. (2022). Design And Simulation Of Foldable Furniture In Ansys. Elementary Education Online, 20(4), 4394.
Kittur, J., Ramachandran, M., Fegade, V., & Ragavendran, U. (2018). Numerical Investigation of Total Deformation Inroller Bearing using Ansys Analysis. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 51–58.
Kristianto, F. P., Fariz, N., Saputra, D., & Athirah, S. I. (2022). Framework for Furniture and Wood Processing Industry Polytechnic in Era Disruption of Covid-19. International Research Journal Of Business Studies, 14(2), 107–117.
Mahalingam, T., & Chandima, D. P. (2016). Gap calculation method to minimize inductance drop during reflow on helical wound planar power inductors. 2016 Manufacturing & Industrial Engineering Symposium (MIES), 1–6. IEEE.
Pawar, P., Ballav, R., & Kumar, A. (2016). Finite element method broach tool drilling analysis using explicit dynamics ansys. International Journal of Modern Manufacturing Technologies, 8(2), 54–60.
Raafat, E., Nassef, A., El-hadek, M., & El-Megharbel, A. (2019). Fatigue and thermal stress analysis of submerged steel pipes using ANSYS software. Ocean Engineering, 193, 106574.
Singh, L., Rawat, S. S., Hasan, T., & Kumar, U. (2015). Finite element analysis of piston in ANSYS. International Journal of Modern Trends in Engineering and Research, 4, 619–626.
Supardi, S. (2020). Penyelenggaraan Praktik Industri di Politeknik Industri Furnitur Kendal di Era Pandemi Covid-19. Prosiding Seminar Nasional Pascasarjana (PROSNAMPAS), 3(1), 543–551.
